|

AGRON 111 Practical 10: Yield components and crop-yield estimation | उपज घटक और फसल उपज अनुमान

AGRON 111 • PRACTICAL 10 • HINDI + ENGLISH

Yield components and crop-yield estimation

उपज घटक और फसल उपज अनुमान

B.Sc. Agriculture • Fundamentals of Agronomy

In this lecture / इस पाठ में

  1. Aim and sampling | उद्देश्य व नमूना
  2. Area-based estimate | क्षेत्र आधारित अनुमान
  3. Component estimate | घटक अनुमान
  4. Moisture and record | नमी और रिकॉर्ड

Aim and sampling | उद्देश्य व नमूना

English

Estimate yield using representative crop cuts and examine yield-contributing characters. Avoid selecting only the best plants or convenient borders. Follow a defined sampling plan with multiple locations and measured area. Crop-specific components differ: cereal ears/panicles, grain number and grain mass are not identical to pod-crop components.

हिन्दी

प्रतिनिधि crop cut और घटकों से अनुमान करें।सिर्फ अच्छे पौध/किनारा न चुनें।कई स्थान,मापा क्षेत्र,निर्धारित plan लें।अनाज बालियाँ-दाना-भार और फली वाली फसल घटक अलग हैं।

Area-based estimate | क्षेत्र आधारित अनुमान

English

If cleaned grain from1m² weighs450g at a stated moisture basis, yield=450×10=4500kg/ha. The factor10 converts g/m² to kg/ha. For2m² yielding0.9kg,0.9/2×10000 also gives4500kg/ha. Account for sample losses, harvested area and moisture consistently.

हिन्दी

1m² से450g साफ दाना पर450×10=4500kg/ha।g/m²सेkg/ha factor10।2m²से0.9kg पर0.9/2×10000 वही है।हानि,क्षेत्र,नमी समान आधार पर रखें।

Component estimate | घटक अनुमान

English

Illustrative300ears/m²×30grains/ear×0.04g/grain=360g/m²=3600kg/ha. Components must be representative and compatible. Multiplying independently selected maximum values exaggerates yield; component estimates are useful cross-checks, not substitutes for a properly sampled harvest.

हिन्दी

300बालियाँ/m²×30दाने×0.04g=360g/m²=3600kg/ha।घटक प्रतिनिधि-संगत हों।अलग-अलग अधिकतम जोड़ना उपज बढ़ा-चढ़ाता है;उचित harvest का विकल्प नहीं।

Moisture and record | नमी और रिकॉर्ड

English

Moisture correction uses mass at target moisture=observed mass×(100−observed moisture%)/(100−target moisture%) on a wet basis. For1000kg at16% to12%, corrected mass=954.55kg. Record quadrat area, raw/cleaned mass, moisture, components, calculations and variability; state whether yield is estimated or measured.

हिन्दी

wet basis पर लक्ष्य भार=प्रेक्षित भार×(100−प्रेक्षितनमी)/(100−लक्ष्यनमी)।1000kg16%से12%पर954.55kg।क्षेत्र,कच्चा/साफ भार,नमी,घटक,गणना,विविधता लिखें;अनुमान/माप स्पष्ट।

Practice / Record | अभ्यास / रिकॉर्ड

A single border plant with many tillers is not a representative field-yield sample.

अधिक tiller वाला एक किनारे पौध खेत का प्रतिनिधि नहीं।

Self-check & viva | स्वयं जाँच

Try answering before opening the answer. / पहले स्वयं उत्तर दें।

450g/m² equals? | उपज?

4500kg/ha. |4500kg/ha।

Why standardize moisture? | क्यों?

Water content otherwise changes the apparent grain mass. | जल मात्रा apparent भार बदलती है।

Exam answer plan: define the term, explain the mechanism, add a labelled diagram or calculation where relevant, state assumptions and limitations. / उत्तर क्रम: परिभाषा, क्रियाविधि, उपयुक्त चित्र/गणना, शर्तें और सीमाएँ।

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *